Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for reported issues.
  Included in here are:

   - sh-sci serial driver fixes

   - 8250_dw and _mtk driver fixes

   - sc16is7xx driver bugfix

   - new 8250_exar device ids added

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_mtk: Enable baud clock and manage in runtime PM
  serial: 8250_dw: handle reset control deassert error
  dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
  serial: sc16is7xx: remove useless enable of enhanced features
  serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
  tty: serial: sh-sci: fix RSCI FIFO overrun handling

Documentation/devicetree/bindings/serial/renesas,scif.yaml

@@ -197,6 +197,7 @@ allOf:
               - renesas,rcar-gen2-scif
               - renesas,rcar-gen3-scif
               - renesas,rcar-gen4-scif
+              - renesas,rcar-gen5-scif
     then:
       properties:
         interrupts:

drivers/tty/serial/8250/8250_dw.c

@@ -635,7 +635,9 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (IS_ERR(data->rst))
 		return PTR_ERR(data->rst);
 
-	reset_control_deassert(data->rst);
+	err = reset_control_deassert(data->rst);
+	if (err)
+		return dev_err_probe(dev, err, "failed to deassert resets\n");
 
 	err = devm_add_action_or_reset(dev, dw8250_reset_control_assert, data->rst);
 	if (err)

drivers/tty/serial/8250/8250_exar.c

@@ -40,6 +40,8 @@
 #define PCI_DEVICE_ID_ACCESSIO_COM_4SM		0x10db
 #define PCI_DEVICE_ID_ACCESSIO_COM_8SM		0x10ea
 
+#define PCI_DEVICE_ID_ADVANTECH_XR17V352	0x0018
+
 #define PCI_DEVICE_ID_COMMTECH_4224PCI335	0x0002
 #define PCI_DEVICE_ID_COMMTECH_4222PCI335	0x0004
 #define PCI_DEVICE_ID_COMMTECH_2324PCI335	0x000a
@@ -1622,6 +1624,12 @@ static const struct exar8250_board pbn_fastcom35x_8 = {
 	.exit		= pci_xr17v35x_exit,
 };
 
+static const struct exar8250_board pbn_adv_XR17V352 = {
+	.num_ports	= 2,
+	.setup		= pci_xr17v35x_setup,
+	.exit		= pci_xr17v35x_exit,
+};
+
 static const struct exar8250_board pbn_exar_XR17V4358 = {
 	.num_ports	= 12,
 	.setup		= pci_xr17v35x_setup,
@@ -1696,6 +1704,9 @@ static const struct pci_device_id exar_pci_tbl[] = {
 	USR_DEVICE(XR17C152, 2980, pbn_exar_XR17C15x),
 	USR_DEVICE(XR17C152, 2981, pbn_exar_XR17C15x),
 
+	/* ADVANTECH devices */
+	EXAR_DEVICE(ADVANTECH, XR17V352, pbn_adv_XR17V352),
+
 	/* Exar Corp. XR17C15[248] Dual/Quad/Octal UART */
 	EXAR_DEVICE(EXAR, XR17C152, pbn_exar_XR17C15x),
 	EXAR_DEVICE(EXAR, XR17C154, pbn_exar_XR17C15x),

drivers/tty/serial/8250/8250_mtk.c

@@ -435,6 +435,7 @@ static int __maybe_unused mtk8250_runtime_suspend(struct device *dev)
 	while
 		(serial_in(up, MTK_UART_DEBUG0));
 
+	clk_disable_unprepare(data->uart_clk);
 	clk_disable_unprepare(data->bus_clk);
 
 	return 0;
@@ -445,6 +446,7 @@ static int __maybe_unused mtk8250_runtime_resume(struct device *dev)
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 
 	clk_prepare_enable(data->bus_clk);
+	clk_prepare_enable(data->uart_clk);
 
 	return 0;
 }
@@ -475,13 +477,13 @@ static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
 	int dmacnt;
 #endif
 
-	data->uart_clk = devm_clk_get(&pdev->dev, "baud");
+	data->uart_clk = devm_clk_get_enabled(&pdev->dev, "baud");
 	if (IS_ERR(data->uart_clk)) {
 		/*
 		 * For compatibility with older device trees try unnamed
 		 * clk when no baud clk can be found.
 		 */
-		data->uart_clk = devm_clk_get(&pdev->dev, NULL);
+		data->uart_clk = devm_clk_get_enabled(&pdev->dev, NULL);
 		if (IS_ERR(data->uart_clk)) {
 			dev_warn(&pdev->dev, "Can't get uart clock\n");
 			return PTR_ERR(data->uart_clk);

drivers/tty/serial/sc16is7xx.c

@@ -588,13 +588,6 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
 		div /= prescaler;
 	}
 
-	/* Enable enhanced features */
-	sc16is7xx_efr_lock(port);
-	sc16is7xx_port_update(port, SC16IS7XX_EFR_REG,
-			      SC16IS7XX_EFR_ENABLE_BIT,
-			      SC16IS7XX_EFR_ENABLE_BIT);
-	sc16is7xx_efr_unlock(port);
-
 	/* If bit MCR_CLKSEL is set, the divide by 4 prescaler is activated. */
 	sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
 			      SC16IS7XX_MCR_CLKSEL_BIT,

drivers/tty/serial/sh-sci.c

@@ -1014,16 +1014,18 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 	struct sci_port *s = to_sci_port(port);
 	const struct plat_sci_reg *reg;
 	int copied = 0;
-	u16 status;
+	u32 status;
 
-	reg = sci_getreg(port, s->params->overrun_reg);
-	if (!reg->size)
-		return 0;
+	if (s->type != SCI_PORT_RSCI) {
+		reg = sci_getreg(port, s->params->overrun_reg);
+		if (!reg->size)
+			return 0;
+	}
 
-	status = sci_serial_in(port, s->params->overrun_reg);
+	status = s->ops->read_reg(port, s->params->overrun_reg);
 	if (status & s->params->overrun_mask) {
 		status &= ~s->params->overrun_mask;
-		sci_serial_out(port, s->params->overrun_reg, status);
+		s->ops->write_reg(port, s->params->overrun_reg, status);
 
 		port->icount.overrun++;