That was already the limit with KASAN enabled, and the 32-bit x86 build
ends up having a couple of drm cases that have stack frames _just_ over
1kB on my allmodconfig test. So the minimal fix for this build issue
for now is to just bump the limit and make it independent of KASAN.
[ Side note: XTENSA already used 1.5k and PARISC uses 2k, so 1280 is
still relatively conservative ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto library fix from Eric Biggers:
"Fix another KMSAN warning that made it in while KMSAN wasn't working
reliably"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Fix KMSAN warning in test_sha256_finup_2x()
Fully initialize *ctx, including the buf field which sha256_init()
doesn't initialize, to avoid a KMSAN warning when comparing *ctx to
orig_ctx. This KMSAN warning slipped in while KMSAN was not working
reliably due to a stackdepot bug, which has now been fixed.
Fixes: 6733968be7 ("lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251121033431.34406-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
maple_tree tracepoints contain pointers to function names. Such a pointer
is saved when a tracepoint logs an event. There's no guarantee that it's
still valid when the event is parsed later and the pointer is dereferenced.
The kernel warns about these unsafe pointers.
event 'ma_read' has unsafe pointer field 'fn'
WARNING: kernel/trace/trace.c:3779 at ignore_event+0x1da/0x1e4
Mark the function names as tracepoint_string() to fix the events.
One case that doesn't work without my patch would be trace-cmd record
to save the binary ringbuffer and trace-cmd report to parse it in
userspace. The address of __func__ can't be dereferenced from
userspace but tracepoint_string will add an entry to
/sys/kernel/tracing/printk_formats
Link: https://lkml.kernel.org/r/20251030155537.87972-1-martin@kaiser.cx
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull crypto library fixes from Eric Biggers:
"Two Curve25519 related fixes:
- Re-enable KASAN support on curve25519-hacl64.c with gcc.
- Disable the arm optimized Curve25519 code on CPU_BIG_ENDIAN
kernels. It has always been broken in that configuration"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: arm/curve25519: Disable on CPU_BIG_ENDIAN
lib/crypto: curve25519-hacl64: Fix older clang KASAN workaround for GCC
On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.
It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.
Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.
Fixes: d8f1308a02 ("crypto: arm/curve25519 - wire up NEON implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251104054906.716914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
Pull kunit fixes from Shuah Khan:
"Fix log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action().
Update email address for Rae Moar in MAINTAINERS KUnit entry"
* tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Update KUnit email address for Rae Moar
kunit: prevent log overwrite in param_tests
kunit: test_dev_action: Correctly cast 'priv' pointer to long*
Commit 5ff8c11775 ("KMSAN: Remove tautological checks") changed
CONFIG_HAVE_KMSAN_COMPILER from a dynamic check for
'-fsanitize=kernel-memory' to just being true for CONFIG_CC_IS_CLANG.
This missed the fact that not all architectures supported
'-fsanitize=kernel-memory' at the same time. For example, SystemZ / s390
gained support for KMSAN in clang-18 [1], so builds with clang-15
through clang-17 can select KMSAN but they error with:
clang-16: error: unsupported option '-fsanitize=kernel-memory' for target 's390x-unknown-linux-gnu'
Restore the cc-option check for '-fsanitize=kernel-memory' to make sure
the compiler target properly supports '-fsanitize=kernel-memory'. The
check for '-msan-disable-checks=1' does not need to be restored because
all supported clang versions for building the kernel support it.
Fixes: 5ff8c11775 ("KMSAN: Remove tautological checks")
Link: a3e56a8792 [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202510220236.AVuXXCYy-lkp@intel.com/
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251023-fix-kmsan-check-s390-clang-v1-1-4e6df477a4cc@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
When running parameterized tests, each test case is initialized with
kunit_init_test(). This function takes the test_case->log as a parameter
but it clears it via string_stream_clear() on each iteration.
This results in only the log from the last parameter being preserved in
the test_case->log and the results from the previous parameters are lost
from the debugfs entry.
Fix this by manually setting the param_test.log to the test_case->log
after it has been initialized. This prevents kunit_init_test() from
clearing the log on each iteration.
Link: https://lore.kernel.org/r/20251024190101.2091549-1-cmllamas@google.com
Fixes: 4b59300ba4 ("kunit: Add parent kunit for parameterized test context")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The previous implementation incorrectly assumed the original type of
'priv' was void**, leading to an unnecessary and misleading
cast. Correct the cast of the 'priv' pointer in test_dev_action() to
its actual type, long*, removing an unnecessary cast.
As an additional benefit, this fixes an out-of-bounds CHERI fault on
hardware with architectural capabilities. The original implementation
tried to store a capability-sized pointer using the priv
pointer. However, the priv pointer's capability only granted access to
the memory region of its original long type, leading to a bounds
violation since the size of a long is smaller than the size of a
capability. This change ensures that the pointer usage respects the
capabilities' bounds.
Link: https://lore.kernel.org/r/20251017092814.80022-1-florian.schmaus@codasip.com
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull integrity updates from Mimi Zohar:
"Just a couple of changes: crypto code cleanup and a IMA xattr bug fix"
* tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
lib/digsig: Use SHA-1 library instead of crypto_shash
integrity: Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
Now that a SHA-1 library API is available, use it instead of
crypto_shash. This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
Pull slab updates from Vlastimil Babka:
- A new layer for caching objects for allocation and free via percpu
arrays called sheaves.
The aim is to combine the good parts of SLAB (lower-overhead and
simpler percpu caching, compared to SLUB) without the past issues
with arrays for freeing remote NUMA node objects and their flushing.
It also allows more efficient kfree_rcu(), and cheaper object
preallocations for cases where the exact number of objects is
unknown, but an upper bound is.
Currently VMAs and maple nodes are using this new caching, with a
plan to enable it for all caches and remove the complex SLUB fastpath
based on cpu (partial) slabs and this_cpu_cmpxchg_double().
(Vlastimil Babka, with Liam Howlett and Pedro Falcato for the maple
tree changes)
- Re-entrant kmalloc_nolock(), which allows opportunistic allocations
from NMI and tracing/kprobe contexts.
Building on prior page allocator and memcg changes, it will result in
removing BPF-specific caches on top of slab (Alexei Starovoitov)
- Various fixes and cleanups. (Kuan-Wei Chiu, Matthew Wilcox, Suren
Baghdasaryan, Ye Liu)
* tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (40 commits)
slab: Introduce kmalloc_nolock() and kfree_nolock().
slab: Reuse first bit for OBJEXTS_ALLOC_FAIL
slab: Make slub local_(try)lock more precise for LOCKDEP
mm: Introduce alloc_frozen_pages_nolock()
mm: Allow GFP_ACCOUNT to be used in alloc_pages_nolock().
locking/local_lock: Introduce local_lock_is_locked().
maple_tree: Convert forking to use the sheaf interface
maple_tree: Add single node allocation support to maple state
maple_tree: Prefilled sheaf conversion and testing
tools/testing: Add support for prefilled slab sheafs
maple_tree: Replace mt_free_one() with kfree()
maple_tree: Use kfree_rcu in ma_free_rcu
testing/radix-tree/maple: Hack around kfree_rcu not existing
tools/testing: include maple-shim.c in maple.c
maple_tree: use percpu sheaves for maple_node_cache
mm, vma: use percpu sheaves for vm_area_struct cache
tools/testing: Add support for changes to slab for sheaves
slab: allow NUMA restricted allocations to use percpu sheaves
tools/testing/vma: Implement vm_refcnt reset
slab: skip percpu sheaves for remote object freeing
...
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
Pull RISC-V updates from Paul Walmsley
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather
than open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if
they are available
- The ability to identity and communicate to userspace the presence
of a MIPS P8700-specific ISA extension, and to leverage its
MIPS-specific PAUSE implementation in cpu_relax()
- Several other miscellaneous cleanups
* tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits)
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
riscv: hwprobe: Document MIPS xmipsexectl vendor extension
riscv: hwprobe: Add MIPS vendor extension probing
riscv: Add xmipsexectl instructions
riscv: Add xmipsexectl as a vendor extension
dt-bindings: riscv: Add xmipsexectl ISA extension description
riscv: cpufeature: add validation for zfa, zfh and zfhmin
perf: riscv: skip empty batches in counter start
selftests: riscv: Add README for RISC-V KSelfTest
riscv: sbi: Switch to new sys-off handler API
riscv: Move vendor errata definitions to new header
RISC-V: ACPI: enable parsing the BGRT table
riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG
riscv: pi: use 'targets' instead of extra-y in Makefile
riscv: introduce asm/swab.h
riscv: mmap(): use unsigned offset type in riscv_sys_mmap
drivers/perf: riscv: Remove redundant ternary operators
riscv: mm: Use mmu-type from FDT to limit SATP mode
riscv: mm: Return intended SATP mode for noXlvl options
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
...
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
Pull ffs const-attribute cleanups from Kees Cook:
"While working on various hardening refactoring a while back we
encountered inconsistencies in the application of __attribute_const__
on the ffs() family of functions.
This series fixes this across all archs and adds KUnit tests.
Notably, this found a theoretical underflow in PCI (also fixed here)
and uncovered an inefficiency in ARC (fixed in the ARC arch PR). I
kept the series separate from the general hardening PR since it is a
stand-alone "topic".
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's
ffs()-family of functions.
- Add KUnit tests for ffs() behavior and const-ness"
* tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
KUnit: ffs: Validate all the __attribute_const__ annotations
sparc: Add __attribute_const__ to ffs()-family implementations
xtensa: Add __attribute_const__ to ffs()-family implementations
s390: Add __attribute_const__ to ffs()-family implementations
parisc: Add __attribute_const__ to ffs()-family implementations
mips: Add __attribute_const__ to ffs()-family implementations
m68k: Add __attribute_const__ to ffs()-family implementations
openrisc: Add __attribute_const__ to ffs()-family implementations
riscv: Add __attribute_const__ to ffs()-family implementations
hexagon: Add __attribute_const__ to ffs()-family implementations
alpha: Add __attribute_const__ to ffs()-family implementations
sh: Add __attribute_const__ to ffs()-family implementations
powerpc: Add __attribute_const__ to ffs()-family implementations
x86: Add __attribute_const__ to ffs()-family implementations
csky: Add __attribute_const__ to ffs()-family implementations
bitops: Add __attribute_const__ to generic ffs()-family implementations
KUnit: Introduce ffs()-family tests
PCI: Test for bit underflow in pcie_set_readrq()
Pull interleaved SHA-256 hashing support from Eric Biggers:
"Optimize fsverity with 2-way interleaved hashing
Add support for 2-way interleaved SHA-256 hashing to lib/crypto/, and
make fsverity use it for faster file data verification. This improves
fsverity performance on many x86_64 and arm64 processors.
Later, I plan to make dm-verity use this too"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: Use 2-way interleaved SHA-256 hashing when supported
fsverity: Remove inode parameter from fsverity_hash_block()
lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()
lib/crypto: x86/sha256: Add support for 2-way interleaved hashing
lib/crypto: arm64/sha256: Add support for 2-way interleaved hashing
lib/crypto: sha256: Add support for 2-way interleaved hashing
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
Pull CRC updates from Eric Biggers:
"Update crc_kunit to test the CRC functions in softirq and hardirq
contexts, similar to what the lib/crypto/ KUnit tests do. Move the
helper function needed to do this into a common header.
This is useful mainly to test fallback code paths for when
FPU/SIMD/vector registers are unusable"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
Documentation/staging: Fix typo and incorrect citation in crc32.rst
lib/crc: Drop inline from all *_mod_init_arch() functions
lib/crc: Use underlying functions instead of crypto_simd_usable()
lib/crc: crc_kunit: Test CRC computation in interrupt contexts
kunit, lib/crypto: Move run_irq_test() to common header
Use the generic interface which should result in less bulk allocations
during a forking.
A part of this is to abstract the freeing of the sheaf or maple state
allocations into its own function so mas_destroy() and the tree
duplication code can use the same functionality to return any unused
resources.
[andriy.shevchenko@linux.intel.com: remove unused mt_alloc_bulk()]
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The fast path through a write will require replacing a single node in
the tree. Using a sheaf (32 nodes) is too heavy for the fast path, so
special case the node store operation by just allocating one node in the
maple state.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use prefilled sheaves instead of bulk allocations. This should speed up
the allocations and the return path of unused allocations.
Remove the push and pop of nodes from the maple state as this is now
handled by the slab layer with sheaves.
Testing has been removed as necessary since the features of the tree
have been reduced.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
kfree() is a little shorter and works with kmem_cache_alloc'd pointers
too. Also lets us remove one more helper.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
kfree_rcu is an optimized version of call_rcu + kfree. It used to not be
possible to call it on non-kmalloc objects, but this restriction was
lifted ever since SLOB was dropped from the kernel, and since commit
6c6c47b063 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()").
Thus, replace call_rcu + mt_free_rcu with kfree_rcu.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Setup the maple_node_cache with percpu sheaves of size 32 to hopefully
improve its performance. Note this will not immediately take advantage
of sheaf batching of kfree_rcu() operations due to the maple tree using
call_rcu with custom callbacks. The followup changes to maple tree will
change that and also make use of the prefilled sheaves functionality.
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Bulk insert mode was added to facilitate forking faster, but forking now
uses __mt_dup() to duplicate the tree.
The addition of sheaves has made the bulk allocations difficult to
maintain - since the expected entries would preallocate into the maple
state. A big part of the maple state node allocation was the ability to
push nodes back onto the state for later use, which was essential to the
bulk insert algorithm.
Remove mas_expected_entries() and mas_destroy_rebalance() functions as
well as the MA_STATE_BULK and MA_STATE_REBALANCE maple state flags since
there are no users anymore. Drop the associated testing as well.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).
Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
While rare, memory allocation profiling can contain inaccurate counters if
slab object extension vector allocation fails. That allocation might
succeed later but prior to that, slab allocations that would have used
that object extension vector will not be accounted for. To indicate
incorrect counters, "accurate:no" marker is appended to the call site line
in the /proc/allocinfo output. Bump up /proc/allocinfo version to reflect
the change in the file format and update documentation.
Example output with invalid counters:
allocinfo - version: 2.0
0 0 arch/x86/kernel/kdebugfs.c:105 func:create_setup_data_nodes
0 0 arch/x86/kernel/alternative.c:2090 func:alternatives_smp_module_add
0 0 arch/x86/kernel/alternative.c:127 func:__its_alloc accurate:no
0 0 arch/x86/kernel/fpu/regset.c:160 func:xstateregs_set
0 0 arch/x86/kernel/fpu/xstate.c:1590 func:fpstate_realloc
0 0 arch/x86/kernel/cpu/aperfmperf.c:379 func:arch_enable_hybrid_capacity_scale
0 0 arch/x86/kernel/cpu/amd_cache_disable.c:258 func:init_amd_l3_attrs
49152 48 arch/x86/kernel/cpu/mce/core.c:2709 func:mce_device_create accurate:no
32768 1 arch/x86/kernel/cpu/mce/genpool.c:132 func:mce_gen_pool_create
0 0 arch/x86/kernel/cpu/mce/amd.c:1341 func:mce_threshold_create_device
[surenb@google.com: document new "accurate:no" marker]
Fixes: 39d117e04d15 ("alloc_tag: mark inaccurate allocation counters in /proc/allocinfo output")
[akpm@linux-foundation.org: simplification per Usama, reflow text]
[akpm@linux-foundation.org: add newline to prevent docs warning, per Randy]
Link: https://lkml.kernel.org/r/20250915230224.4115531-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kasan: unify kasan_enabled() and remove arch-specific
implementations", v6.
This patch series addresses the fragmentation in KASAN initialization
across architectures by introducing a unified approach that eliminates
duplicate static keys and arch-specific kasan_arch_is_ready()
implementations.
The core issue is that different architectures have inconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions
or always-on behavior
This patch (of 2):
Introduce CONFIG_ARCH_DEFER_KASAN to identify architectures [1] that need
to defer KASAN initialization until shadow memory is properly set up, and
unify the static key infrastructure across all KASAN modes.
[1] PowerPC, UML, LoongArch selects ARCH_DEFER_KASAN.
The core issue is that different architectures haveinconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own
kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions or always-on
behavior
This patch addresses the fragmentation in KASAN initialization across
architectures by introducing a unified approach that eliminates duplicate
static keys and arch-specific kasan_arch_is_ready() implementations.
Let's replace kasan_arch_is_ready() with existing kasan_enabled() check,
which examines the static key being enabled if arch selects
ARCH_DEFER_KASAN or has HW_TAGS mode support. For other arch,
kasan_enabled() checks the enablement during compile time.
Now KASAN users can use a single kasan_enabled() check everywhere.
Link: https://lkml.kernel.org/r/20250810125746.1105476-1-snovitoll@gmail.com
Link: https://lkml.kernel.org/r/20250810125746.1105476-2-snovitoll@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217049
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> #powerpc
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Marco Elver <elver@google.com>
Cc: Qing Zhang <zhangqing@loongson.cn>
Cc: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
