mirror of
https://github.com/torvalds/linux.git
synced 2025-11-30 23:16:01 +07:00
master
1285 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Xi Ruoyao
|
fe4b3a34e9 |
rust: Add -fno-isolate-erroneous-paths-dereference to bindgen_skip_c_flags
It's used to work around an objtool issue since commit |
||
|
Miguel Ojeda
|
fad472efab |
rust: kbuild: workaround rustdoc doctests modifier bug
The `rustdoc` modifiers bug [1] was fixed in Rust 1.90.0 [2], for which
we added a workaround in commit
|
||
|
Miguel Ojeda
|
16c43a56b7 |
rust: kbuild: treat build_error and rustdoc as kernel objects
Even if normally `build_error` isn't a kernel object, it should still
be treated as such so that we pass the same flags. Similarly, `rustdoc`
targets are never kernel objects, but we need to treat them as such.
Otherwise, starting with Rust 1.91.0 (released 2025-10-30), `rustc`
will complain about missing sanitizer flags since `-Zsanitizer` is a
target modifier too [1]:
error: mixing `-Zsanitizer` will cause an ABI mismatch in crate `build_error`
--> rust/build_error.rs:3:1
|
3 | //! Build-time error.
| ^
|
= help: the `-Zsanitizer` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zsanitizer` in this crate is incompatible with `-Zsanitizer=kernel-address` in dependency `core`
= help: set `-Zsanitizer=kernel-address` in this crate or unset `-Zsanitizer` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=sanitizer` to silence this error
Thus explicitly mark them as kernel objects.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/138736 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Link: https://patch.msgid.link/20251102212853.1505384-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Miguel Ojeda
|
09b1704f5b |
rust: condvar: fix broken intra-doc link
The future move of pin-init to `syn` uncovers the following broken
intra-doc link:
error: unresolved link to `crate::pin_init`
--> rust/kernel/sync/condvar.rs:39:40
|
39 | /// instances is with the [`pin_init`](crate::pin_init!) and [`new_condvar`] macros.
| ^^^^^^^^^^^^^^^^ no item named `pin_init` in module `kernel`
|
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::broken_intra_doc_links)]`
Currently, when rendered, the link points to a literal `crate::pin_init!`
URL.
Thus fix it.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Miguel Ojeda
|
ff4d2ef387 |
rust: devres: fix private intra-doc link
The future move of pin-init to `syn` uncovers the following private
intra-doc link:
error: public documentation for `Devres` links to private item `Self::inner`
--> rust/kernel/devres.rs:106:7
|
106 | /// [`Self::inner`] is guaranteed to be initialized and is always accessed read-only.
| ^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `-D rustdoc::private-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::private_intra_doc_links)]`
Currently, when rendered, the link points to "nowhere" (an inexistent
anchor for a "method").
Thus fix it.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
72761a7e31 |
Merge tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich: - In Device::parent(), do not make any assumptions on the device context of the parent device - Check visibility before changing ownership of a sysfs attribute group - In topology_parse_cpu_capacity(), replace an incorrect usage of PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL() - In devcoredump, fix a circular locking dependency between struct devcd_entry::mutex and kernfs - Do not warn about a pending fw_devlink sync state * tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: arch_topology: Fix incorrect error check in topology_parse_cpu_capacity() rust: device: fix device context of Device::parent() sysfs: check visibility before changing group attribute ownership devcoredump: Fix circular locking dependency with devcd->mutex. driver core: fw_devlink: Don't warn about sync_state() pending |
||
|
Danilo Krummrich
|
cfec502b3d |
rust: device: fix device context of Device::parent()
Regardless of the DeviceContext of a device, we can't give any
guarantees about the DeviceContext of its parent device.
This is very subtle, since it's only caused by a simple typo, i.e.
Self::from_raw(parent)
which preserves the DeviceContext in this case, vs.
Device::from_raw(parent)
which discards the DeviceContext.
(I should have noticed it doing the correct thing in auxiliary::Device
subsequently, but somehow missed it.)
Hence, fix both Device::parent() and auxiliary::Device::parent().
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Miguel Ojeda
|
1f1d3e1d09 |
rust: bitmap: fix formatting
We do our best to keep the repository `rustfmt`-clean, thus run the tool
to fix the formatting issue.
Link: https://docs.kernel.org/rust/coding-guidelines.html#style-formatting
Link: https://rust-for-linux.com/contributing#submit-checklist-addendum
Fixes:
|
||
|
Miguel Ojeda
|
32f072d9ea |
rust: cpufreq: fix formatting
We do our best to keep the repository `rustfmt`-clean, thus run the tool
to fix the formatting issue.
Link: https://docs.kernel.org/rust/coding-guidelines.html#style-formatting
Link: https://rust-for-linux.com/contributing#submit-checklist-addendum
Fixes:
|
||
|
Miguel Ojeda
|
8a7c601e14 |
rust: alloc: employ a trailing comment to keep vertical layout
Apply the formatting guidelines introduced in the previous commit to make the file `rustfmt`-clean again. Reviewed-by: Benno Lossin <lossin@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Linus Torvalds
|
7ea30958b3 |
Merge tag 'vfs-6.18-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Handle inode number mismatches in nsfs file handles
- Update the comment to init_file()
- Add documentation link for EBADF in the rust file code
- Skip read lock assertion for read-only filesystems when using dax
- Don't leak disconnected dentries during umount
- Fix new coredump input pattern validation
- Handle ENOIOCTLCMD conversion in vfs_fileattr_{g,s}et() correctly
- Remove redundant IOCB_DIO_CALLER_COMP clearing in overlayfs
* tag 'vfs-6.18-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: remove redundant IOCB_DIO_CALLER_COMP clearing
fs: return EOPNOTSUPP from file_setattr/file_getattr syscalls
Revert "fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP"
coredump: fix core_pattern input validation
vfs: Don't leak disconnected dentries on umount
dax: skip read lock assertion for read-only filesystems
rust: file: add intra-doc link for 'EBADF'
fs: update comment in init_file()
nsfs: handle inode number mismatches gracefully in file handles
|
||
|
Miguel Ojeda
|
0f5878834d |
rust: bitmap: clean Rust 1.92.0 unused_unsafe warning
Starting with Rust 1.92.0 (expected 2025-12-11), Rust allows to safely
take the address of a union field [1][2]:
CLIPPY L rust/kernel.o
error: unnecessary `unsafe` block
--> rust/kernel/bitmap.rs:169:13
|
169 | unsafe { core::ptr::addr_of!(self.repr.bitmap) }
| ^^^^^^ unnecessary `unsafe` block
|
= note: `-D unused-unsafe` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_unsafe)]`
error: unnecessary `unsafe` block
--> rust/kernel/bitmap.rs:185:13
|
185 | unsafe { core::ptr::addr_of_mut!(self.repr.bitmap) }
| ^^^^^^ unnecessary `unsafe` block
Thus allow both instances to clean the warning in newer compilers.
Link: https://github.com/rust-lang/rust/issues/141264 [1]
Link: https://github.com/rust-lang/rust/pull/141469 [2]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
||
|
Linus Torvalds
|
971370a88c |
Merge tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton: "7 hotfixes. All 7 are cc:stable and all 7 are for MM. All singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: hugetlb: avoid soft lockup when mprotect to large memory area fsnotify: pass correct offset to fsnotify_mmap_perm() mm/ksm: fix flag-dropping behavior in ksm_madvise mm/damon/vaddr: do not repeat pte_offset_map_lock() until success mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled mTHP subpage to shared zeropage mm/thp: fix MTE tag mismatch when replacing zero-filled subpages memcg: skip cgroup_file_notify if spinning is not allowed |
||
|
Jakub Acs
|
f04aad36a0 |
mm/ksm: fix flag-dropping behavior in ksm_madvise
syzkaller discovered the following crash: (kernel BUG) [ 44.607039] ------------[ cut here ]------------ [ 44.607422] kernel BUG at mm/userfaultfd.c:2067! [ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none) [ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460 <snip other registers, drop unreliable trace> [ 44.617726] Call Trace: [ 44.617926] <TASK> [ 44.619284] userfaultfd_release+0xef/0x1b0 [ 44.620976] __fput+0x3f9/0xb60 [ 44.621240] fput_close_sync+0x110/0x210 [ 44.622222] __x64_sys_close+0x8f/0x120 [ 44.622530] do_syscall_64+0x5b/0x2f0 [ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 44.623244] RIP: 0033:0x7f365bb3f227 Kernel panics because it detects UFFD inconsistency during userfaultfd_release_all(). Specifically, a VMA which has a valid pointer to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags. The inconsistency is caused in ksm_madvise(): when user calls madvise() with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode, it accidentally clears all flags stored in the upper 32 bits of vma->vm_flags. Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and int are 32-bit wide. This setup causes the following mishap during the &= ~VM_MERGEABLE assignment. VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then promoted to unsigned long before the & operation. This promotion fills upper 32 bits with leading 0s, as we're doing unsigned conversion (and even for a signed conversion, this wouldn't help as the leading bit is 0). & operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears the upper 32-bits of its value. Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the BIT() macro. Note: other VM_* flags are not affected: This only happens to the VM_MERGEABLE flag, as the other VM_* flags are all constants of type int and after ~ operation, they end up with leading 1 and are thus converted to unsigned long with leading 1s. Note 2: After commit |
||
|
Linus Torvalds
|
abdf766d14 |
Merge tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are cpufreq fixes and cleanups on top of the material merged
previously, a power management core code fix and updates of the
runtime PM framework including unit tests, documentation updates and
introduction of auto-cleanup macros for runtime PM "resume and get"
and "get without resuming" operations.
Specifics:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6
cycle that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency()
to indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
- Make pm_runtime_put*() family of functions return 1 when the given
device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update
return values in kerneldoc comments for the runtime PM API (Brian
Norris, Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)"
* tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
|
||
|
Tong Li
|
d68a29a6a2 |
rust: file: add intra-doc link for 'EBADF'
The `BadFdError` doc comment mentions the `EBADF` constant but does not currently provide a navigation target for readers of the generated docs. Turning the references into intra-doc links matches the rest of the module and makes the documentation easier to explore. Suggested-by: Onur Özkan <work@onurozkan.dev> Link: https://github.com/Rust-for-Linux/linux/issues/1186 Signed-off-by: Tong Li <djfkvcing117@gmail.com> Reviewed-by: Onur Özkan <work@onurozkan.dev> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Rafael J. Wysocki
|
53d4d315d4 |
Merge branch 'pm-cpufreq'
Merge cpufreq fixes and cleanups, mostly on top of those fixes, for 6.18-rc1: - Make cpufreq drivers setting the default CPU transition latency to CPUFREQ_ETERNAL specify a proper default transition latency value instead which addresses a regression introduced during the 6.6 cycle that broke CPUFREQ_ETERNAL handling (Rafael Wysocki) - Make the cpufreq CPPC driver use a proper transition delay value when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency() to indicate an error condition (Rafael Wysocki) - Make cppc_get_transition_latency() return a negative error code to indicate error conditions instead of using CPUFREQ_ETERNAL for this purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael Wysocki, Gopi Krishna Menon) - Fix device leak in the mediatek cpufreq driver (Johan Hovold) - Set target frequency on all CPUs sharing a policy during frequency updates in the tegra186 cpufreq driver and make it initialize all cores to max frequencies (Aaron Kling) - Rust cpufreq helper cleanup (Thorsten Blum) * pm-cpufreq: docs/zh_CN: Fix malformed table docs/zh_TW: Fix malformed table cpufreq: Drop unused symbol CPUFREQ_ETERNAL ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency cpufreq: tegra186: Initialize all cores to max frequencies cpufreq: tegra186: Set target frequency for all cpus in policy rust: cpufreq: streamline find_supply_names cpufreq: mediatek: fix device leak on probe failure |
||
|
Linus Torvalds
|
6093a688a0 |
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
||
|
Linus Torvalds
|
a498d59c46 |
Merge tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski: - Refactoring of DMA mapping API to physical addresses as the primary interface instead of page+offset parameters This gets much closer to Matthew Wilcox's long term wish for struct-pageless IO to cacheable DRAM and is supporting memdesc project which seeks to substantially transform how struct page works. An advantage of this approach is the possibility of introducing DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the common paths, what in turn lets to use recently introduced dma_iova_link() API to map PCI P2P MMIO without creating struct page Developped by Leon Romanovsky and Jason Gunthorpe - Minor clean-up by Petr Tesarik and Qianfeng Rong * tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: kmsan: fix missed kmsan_handle_dma() signature conversion mm/hmm: properly take MMIO path mm/hmm: migrate to physical address-based DMA mapping API dma-mapping: export new dma_*map_phys() interface xen: swiotlb: Open code map_resource callback dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs() kmsan: convert kmsan_handle_dma to use physical addresses dma-mapping: convert dma_direct_*map_page to be phys_addr_t based iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys() iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys dma-debug: refactor to use physical addresses for page mapping iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link(). dma-mapping: introduce new DMA attribute to indicate MMIO memory swiotlb: Remove redundant __GFP_NOWARN dma-direct: clean up the logic in __dma_direct_alloc_pages() |
||
|
Linus Torvalds
|
8804d970fa |
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
||
|
Linus Torvalds
|
07fdad3a93 |
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
||
|
Linus Torvalds
|
58809f614e |
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
||
|
Linus Torvalds
|
e1b1d03cee |
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
||
|
Linus Torvalds
|
77633c77ee |
Merge tag 'bitmap-for-6.18' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov: - FIELD_PREP_WM16() consolidation (Nicolas) - bitmaps for Rust (Burak) - __fls() fix for arc (Kees) * tag 'bitmap-for-6.18' of https://github.com/norov/linux: (25 commits) rust: add dynamic ID pool abstraction for bitmap rust: add find_bit_benchmark_rust module. rust: add bitmap API. rust: add bindings for bitops.h rust: add bindings for bitmap.h phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro clk: sp7021: switch to FIELD_PREP_WM16 macro PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro PCI: rockchip: Switch to FIELD_PREP_WM16* macros net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros phy: rockchip-usb: switch to FIELD_PREP_WM16 macro drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro ... |
||
|
Linus Torvalds
|
7f70725741 |
Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor: - Extend modules.builtin.modinfo to include module aliases from MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such as kmod) can verify that a particular module alias will be handled by a builtin module - Bump the minimum version of LLVM for building the kernel to 15.0.0 - Upgrade several userspace API checks in headers_check.pl to errors - Unify and consolidate CONFIG_WERROR / W=e handling - Turn assembler and linker warnings into errors with CONFIG_WERROR / W=e - Respect CONFIG_WERROR / W=e when building userspace programs (userprogs) - Enable -Werror unconditionally when building host programs (hostprogs) - Support copy_file_range() and data segment alignment in gen_init_cpio to improve performance on filesystems that support reflinks such as btrfs and XFS - Miscellaneous small changes to scripts and configuration files * tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits) modpost: Initialize builtin_modname to stop SIGSEGVs Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o modpost: Create modalias for builtin modules modpost: Add modname to mod_device_table alias scsi: Always define blogic_pci_tbl structure kbuild: extract modules.builtin.modinfo from vmlinux.unstripped kbuild: keep .modinfo section in vmlinux.unstripped kbuild: always create intermediate vmlinux.unstripped s390: vmlinux.lds.S: Reorder sections KMSAN: Remove tautological checks objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs riscv: Unconditionally use linker relaxation riscv: Remove version check for LTO_CLANG selects powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault() mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER arm64: Remove tautological LLVM Kconfig conditions ARM: Clean up definition of ARM_HAS_GROUP_RELOCS ... |
||
|
Linus Torvalds
|
30bbcb4470 |
Merge tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
|
||
|
Linus Torvalds
|
991053178e |
Merge tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
|
||
|
Linus Torvalds
|
ad6657804c |
Merge tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release for regulator, almost all the changes are
new drivers but we do also have some improvements for the Rust
bindings.
- Additional APIs added to the Rust bindings
- Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133
and SpacemiT P1"
* tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (28 commits)
regulator: dt-bindings: qcom,sdm845-refgen-regulator: document more platforms
regulator: Fix MAX77838 selection
regulator: spacemit: support SpacemiT P1 regulators
regulator: max77838: add max77838 regulator driver
dt-bindings: regulator: document max77838 pmic
rust: regulator: add devm_enable and devm_enable_optional
rust: regulator: remove Regulator<Dynamic>
regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
regulator: pf530x: Add a driver for the NXP PF5300 Regulator
regulator: dt-bindings: nxp,pf530x: Add NXP PF5300/PF5301/PF5302 PMICs
regulator: scmi: Use int type to store negative error codes
regulator: core: Remove redundant ternary operators
rust: regulator: use `to_result` for error handling
regulator: consumer.rst: document bulk operations
regulator: rt5133: Fix IS_ERR() vs NULL bug in rt5133_validate_vendor_info()
regulator: bd718x7: Use kcalloc() instead of kzalloc()
regulator: rt5133: Fix spelling mistake "regualtor" -> "regulator"
regulator: remove unneeded 'fast_io' parameter in regmap_config
regulator: rt5133: Add RT5133 PMIC regulator Support
regulator: dt-bindings: Add Richtek RT5133 Support
...
|
||
|
Linus Torvalds
|
eb3289fc47 |
Merge tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
||
|
Rafael J. Wysocki
|
f97aef092e |
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
Commit |
||
|
Linus Torvalds
|
f4e0ff7e45 |
Merge tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment:🆕:<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment:🆕:<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment:🆕:<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment:🆕:<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
|
||
|
Linus Torvalds
|
88b489385b |
Merge tag 'locking-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Mostly Rust runtime enhancements:
- Add initial support for generic LKMM atomic variables in Rust (Boqun Feng)
- Add the wrapper for `refcount_t` in Rust (Gary Guo)
- Add a new reviewer, Gary Guo"
* tag 'locking-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: update atomic infrastructure entry to include Rust
rust: block: convert `block::mq` to use `Refcount`
rust: convert `Arc` to use `Refcount`
rust: make `Arc::into_unique_or_drop` associated function
rust: implement `kernel::sync::Refcount`
rust: sync: Add memory barriers
rust: sync: atomic: Add Atomic<{usize,isize}>
rust: sync: atomic: Add Atomic<u{32,64}>
rust: sync: atomic: Add the framework of arithmetic operations
rust: sync: atomic: Add atomic {cmp,}xchg operations
rust: sync: atomic: Add generic atomics
rust: sync: atomic: Add ordering annotation types
rust: sync: Add basic atomic operation mapping framework
rust: Introduce atomic API helpers
|
||
|
Linus Torvalds
|
76f01a4f22 |
Merge tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore: - Move the management of the LSM BPF security blobs into the framework In order to enable multiple LSMs we need to allocate and free the various security blobs in the LSM framework and not the individual LSMs as they would end up stepping all over each other. - Leverage the lsm_bdev_alloc() helper in lsm_bdev_alloc() Make better use of our existing helper functions to reduce some code duplication. - Update the Rust cred code to use 'sync::aref' Part of a larger effort to move the Rust code over to the 'sync' module. - Make CONFIG_LSM dependent on CONFIG_SECURITY As the CONFIG_LSM Kconfig setting is an ordered list of the LSMs to enable a boot, it obviously doesn't make much sense to enable this when CONFIG_SECURITY is disabled. - Update the LSM and CREDENTIALS sections in MAINTAINERS with Rusty bits Add the Rust helper files to the associated LSM and CREDENTIALS entries int the MAINTAINERS file. We're trying to improve the communication between the two groups and making sure we're all aware of what is going on via cross-posting to the relevant lists is a good way to start. * tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lsm: CONFIG_LSM can depend on CONFIG_SECURITY MAINTAINERS: add the associated Rust helper to the CREDENTIALS section MAINTAINERS: add the associated Rust helper to the LSM section rust,cred: update AlwaysRefCounted import to sync::aref security: use umax() to improve code lsm,selinux: Add LSM blob support for BPF objects lsm: use lsm_blob_alloc() in lsm_bdev_alloc() |
||
|
Linus Torvalds
|
df897265c0 |
Merge tag 'vfs-6.18-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust updates from Christian Brauner:
"This contains a few minor vfs rust changes:
- Add the pid namespace Rust wrappers to the correct MAINTAINERS
entry
- Use to_result() in the Rust file error handling code
- Update imports for fs and pid_namespce Rust wrappers"
* tag 'vfs-6.18-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: file: use to_result for error handling
pid: add Rust files to MAINTAINERS
rust: fs: update ARef and AlwaysRefCounted imports from sync::aref
rust: pid_namespace: update AlwaysRefCounted imports from sync::aref
|
||
|
Rafael J. Wysocki
|
d6fd599cd4 |
Merge branches 'pm-em', 'pm-opp' and 'pm-devfreq'
Merge energy model management, OPP (operating performance points) and devfreq updates for 6.18-rc1: - Prevent CPU capacity updates after registering a perf domain from failing on a first CPU that is not present (Christian Loehle) - Add support for the cases in which frequency alone is not sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru) - Use to_result() for OPP error handling in Rust (Onur Özkan) - Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi devfreq driver (Nicolas Frattaroli) - Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X) are reported as half by adding a cycle multiplier to the DFI driver in rockchip-dfi devfreq-event driver (Nicolas Frattaroli) - Fix missing error pointer dereference check of regulator instance in the mtk-cci devfreq driver probe and remove a redundant condition from an if () statement in that driver (Dan Carpenter, Liao Yuanhong) * pm-em: PM: EM: Fix late boot with holes in CPU topology * pm-opp: OPP: Add support to find OPP for a set of keys rust: opp: use to_result for error handling * pm-devfreq: PM / devfreq: rockchip-dfi: add support for LPDDR5 PM / devfreq: rockchip-dfi: double count on RK3588 PM / devfreq: mtk-cci: avoid redundant conditions PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe() |
||
|
Danilo Krummrich
|
22d693e45d |
rust: usb: keep usb::Device private for now
The USB abstractions target to support USB interface drivers. While internally the abstraction has to deal with the interface's parent USB device, there shouldn't be a need for users to deal with the parent USB device directly. Functions, such as for preparing and sending USB URBs, can be implemented for the usb::Interface structure directly. Whether this internal implementation has to deal with the parent USB device can remain transparent to USB interface drivers. Hence, keep the usb::Device structure private for now, in order to avoid confusion for users and to make it less likely to accidentally expose APIs with unnecessary indirections. Should we start supporting USB device drivers, or need it for any other reason we do not foresee yet, it should be trivial to make it public again. Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250925190400.144699-2-dakr@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Danilo Krummrich
|
f12140f21a |
rust: usb: don't retain device context for the interface parent
When deriving the parent USB device (struct usb_device) from a USB
interface (struct usb_interface), do not retain the device context.
For the Bound context, as pointed out by Alan in [1], it is not
guaranteed that the parent USB device is always bound when the interface
is bound.
The bigger problem, however, is that we can't infer the Core context,
since eventually it indicates that the device lock is held. However,
there is no guarantee that if the device lock of the interface is held,
also the device lock of the parent USB device is held.
Hence, fix this by not inferring any device context information; while
at it, fix up the (affected) safety comments.
Link: https://lore.kernel.org/all/0ff2a825-1115-426a-a6f9-df544cd0c5fc@rowland.harvard.edu/ [1]
Fixes:
|
||
|
John Hubbard
|
6d97171ac6 |
rust: pci: display symbolic PCI vendor names
The Display implementation for Vendor was forwarding directly to Debug printing, resulting in raw hex values instead of PCI Vendor strings. Improve things by doing a stringify!() call for each PCI Vendor item. This now prints symbolic names such as "NVIDIA", instead of "Vendor(0x10de)". It still falls back to Debug formatting for unknown class values. Suggested-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> [ Remove #[inline] for Vendor::fmt(). - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
John Hubbard
|
d53ea977ad |
rust: pci: display symbolic PCI class names
The Display implementation for Class was forwarding directly to Debug printing, resulting in raw hex values instead of PCI Class strings. Improve things by doing a stringify!() call for each PCI Class item. This now prints symbolic names such as "DISPLAY_VGA", instead of "Class(0x030000)". It still falls back to Debug formatting for unknown class values. Suggested-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Greg Kroah-Hartman
|
c584a1c7c8 |
USB: disable rust bindings from the build for now
The rust USB bindings as submitted are a good start, but they don't really seem to be correct in a number of minor places, so just disable them from the build entirely at this point in time. When they are ready to be re-enabled, this commit can be reverted. Acked-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Rafael J. Wysocki
|
c51f0d3b6e | Merge back earlier cpufreq material for 6.18 | ||
|
Nathan Chancellor
|
c7d3dd9163 |
Merge patch series "Add generated modalias to modules.builtin.modinfo"
Alexey Gladkov says: The modules.builtin.modinfo file is used by userspace (kmod to be specific) to get information about builtin modules. Among other information about the module, information about module aliases is stored. This is very important to determine that a particular modalias will be handled by a module that is inside the kernel. There are several mechanisms for creating modalias for modules: The first is to explicitly specify the MODULE_ALIAS of the macro. In this case, the aliases go into the '.modinfo' section of the module if it is compiled separately or into vmlinux.o if it is builtin into the kernel. The second is the use of MODULE_DEVICE_TABLE followed by the use of the modpost utility. In this case, vmlinux.o no longer has this information and does not get it into modules.builtin.modinfo. For example: $ modinfo pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30 modinfo: ERROR: Module pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30 not found. $ modinfo xhci_pci name: xhci_pci filename: (builtin) license: GPL file: drivers/usb/host/xhci-pci description: xHCI PCI Host Controller Driver The builtin module is missing alias "pci:v*d*sv*sd*bc0Csc03i30*" which will be generated by modpost if the module is built separately. To fix this it is necessary to add the generated by modpost modalias to modules.builtin.modinfo. Fortunately modpost already generates .vmlinux.export.c for exported symbols. It is possible to add `.modinfo` for builtin modules and modify the build system so that `.modinfo` section is extracted from the intermediate vmlinux after modpost is executed. Link: https://patch.msgid.link/cover.1758182101.git.legion@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Alexey Gladkov
|
83fb49389b |
modpost: Add modname to mod_device_table alias
At this point, if a symbol is compiled as part of the kernel, information about which module the symbol belongs to is lost. To save this it is possible to add the module name to the alias name. It's not very pretty, but it's possible for now. Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Andreas Hindborg <a.hindborg@kernel.org> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: rust-for-linux@vger.kernel.org Signed-off-by: Alexey Gladkov <legion@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Nicolas Schier <nsc@kernel.org> Link: https://patch.msgid.link/1a0d0bd87a4981d465b9ed21e14f4e78eaa03ded.1758182101.git.legion@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> |
||
|
Daniel Almeida
|
e7e2296b0e |
rust: usb: add basic USB abstractions
Add basic USB abstractions, consisting of usb::{Device, Interface,
Driver, Adapter, DeviceId} and the module_usb_driver macro. This is the
first step in being able to write USB device drivers, which paves the
way for USB media drivers - for example - among others.
This initial support will then be used by a subsequent sample driver,
which constitutes the only user of the USB abstractions so far.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250825-b4-usb-v1-1-7aa024de7ae8@collabora.com
[ force USB = y for now - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Alexandre Courbot
|
ea60cea07d |
rust: add Alignment type
Alignment operations are very common in the kernel. Since they are always performed using a power-of-two value, enforcing this invariant through a dedicated type leads to fewer bugs and can improve the generated code. Introduce the `Alignment` type, inspired by the nightly Rust type of the same name and providing the same interface, and a new `Alignable` trait allowing unsigned integers to be aligned up or down. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> [ Used `build_assert!`, added intra-doc link, `allow`ed `clippy::incompatible_msrv`, added `feature(const_option)`, capitalized safety comment. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Miguel Ojeda
|
cfe872eba9 |
Merge tag 'rust-timekeeping-v6.18' of https://github.com/Rust-for-Linux/linux into rust-next
Pull timekeeping updates from Andreas Hindborg: - Add methods on 'HrTimer' that can only be called with exclusive access to an unarmed timer, or form timer callback context. - Add arithmetic operations to 'Instant' and 'Delta'. - Add a few convenience and access methods to 'HrTimer' and 'Instant'. * tag 'rust-timekeeping-v6.18' of https://github.com/Rust-for-Linux/linux: rust: time: Implement basic arithmetic operations for Delta rust: time: Implement Add<Delta>/Sub<Delta> for Instant rust: hrtimer: Add HrTimer::expires() rust: time: Add Instant::from_ktime() rust: hrtimer: Add forward_now() to HrTimer and HrTimerCallbackContext rust: hrtimer: Add HrTimerCallbackContext and ::forward() rust: hrtimer: Add HrTimer::raw_forward() and forward() rust: hrtimer: Add HrTimerInstant rust: hrtimer: Document the return value for HrTimerHandle::cancel() |
||
|
Burak Emir
|
2cdae413cd |
rust: add dynamic ID pool abstraction for bitmap
This is a port of the Binder data structure introduced in commit
|
||
|
Burak Emir
|
38cc91db2e |
rust: add find_bit_benchmark_rust module.
Microbenchmark protected by a config FIND_BIT_BENCHMARK_RUST,
following `find_bit_benchmark.c` but testing the Rust Bitmap API.
We add a fill_random() method protected by the config in order to
maintain the abstraction.
The sample output from the benchmark, both C and Rust version:
find_bit_benchmark.c output:
```
Start testing find_bit() with random-filled bitmap
[ 438.101937] find_next_bit: 860188 ns, 163419 iterations
[ 438.109471] find_next_zero_bit: 912342 ns, 164262 iterations
[ 438.116820] find_last_bit: 726003 ns, 163419 iterations
[ 438.130509] find_nth_bit: 7056993 ns, 16269 iterations
[ 438.139099] find_first_bit: 1963272 ns, 16270 iterations
[ 438.173043] find_first_and_bit: 27314224 ns, 32654 iterations
[ 438.180065] find_next_and_bit: 398752 ns, 73705 iterations
[ 438.186689]
Start testing find_bit() with sparse bitmap
[ 438.193375] find_next_bit: 9675 ns, 656 iterations
[ 438.201765] find_next_zero_bit: 1766136 ns, 327025 iterations
[ 438.208429] find_last_bit: 9017 ns, 656 iterations
[ 438.217816] find_nth_bit: 2749742 ns, 655 iterations
[ 438.225168] find_first_bit: 721799 ns, 656 iterations
[ 438.231797] find_first_and_bit: 2819 ns, 1 iterations
[ 438.238441] find_next_and_bit: 3159 ns, 1 iterations
```
find_bit_benchmark_rust.rs output:
```
[ 451.182459] find_bit_benchmark_rust:
[ 451.186688] Start testing find_bit() Rust with random-filled bitmap
[ 451.194450] next_bit: 777950 ns, 163644 iterations
[ 451.201997] next_zero_bit: 918889 ns, 164036 iterations
[ 451.208642] Start testing find_bit() Rust with sparse bitmap
[ 451.214300] next_bit: 9181 ns, 654 iterations
[ 451.222806] next_zero_bit: 1855504 ns, 327026 iterations
```
Here are the results from 32 samples, with 95% confidence interval.
The microbenchmark was built with RUST_BITMAP_HARDENED=n and run on a
machine that did not execute other processes.
Random-filled bitmap:
+-----------+-------+-----------+--------------+-----------+-----------+
| Benchmark | Lang | Mean (ms) | Std Dev (ms) | 95% CI Lo | 95% CI Hi |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_bit/ | C | 825.07 | 53.89 | 806.40 | 843.74 |
| next_bit | Rust | 870.91 | 46.29 | 854.88 | 886.95 |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_zero/| C | 933.56 | 56.34 | 914.04 | 953.08 |
| next_zero | Rust | 945.85 | 60.44 | 924.91 | 966.79 |
+-----------+-------+-----------+--------------+-----------+-----------+
Rust appears 5.5% slower for next_bit, 1.3% slower for next_zero.
Sparse bitmap:
+-----------+-------+-----------+--------------+-----------+-----------+
| Benchmark | Lang | Mean (ms) | Std Dev (ms) | 95% CI Lo | 95% CI Hi |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_bit/ | C | 13.17 | 6.21 | 11.01 | 15.32 |
| next_bit | Rust | 14.30 | 8.27 | 11.43 | 17.17 |
+-----------+-------+-----------+--------------+-----------+-----------+
| find_zero/| C | 1859.31 | 82.30 | 1830.80 | 1887.83 |
| next_zero | Rust | 1908.09 | 139.82 | 1859.65 | 1956.54 |
+-----------+-------+-----------+--------------+-----------+-----------+
Rust appears 8.5% slower for next_bit, 2.6% slower for next_zero.
In summary, taking the arithmetic mean of all slow-downs, we can say
the Rust API has a 4.5% slowdown.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Burak Emir <bqe@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
||
|
Burak Emir
|
11eca92a2c |
rust: add bitmap API.
Provides an abstraction for C bitmap API and bitops operations.
This commit enables a Rust implementation of an Android Binder
data structure from commit
|
||
|
Burak Emir
|
6cf93a9ed3 |
rust: add bindings for bitops.h
Makes atomic set_bit and clear_bit inline functions as well as the non-atomic variants __set_bit and __clear_bit available to Rust. Adds a new MAINTAINERS section BITOPS API BINDINGS [RUST]. Suggested-by: Alice Ryhl <aliceryhl@google.com> Suggested-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Burak Emir <bqe@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Yury Norov (NVIDIA) <yury.norov@gmail.com> Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com> |