Pull Rust fix from Miguel Ojeda:
- Fix a Rust 1.91.0 build issue due to 'bindings.o' not containing
DWARF debug information anymore by teaching gendwarfksyms to skip
object files without exports
* tag 'rust-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
gendwarfksyms: Skip files with no exports
Starting with Rust 1.91.0 (released 2025-10-30), in upstream commit
ab91a63d403b ("Ignore intrinsic calls in cross-crate-inlining cost model")
[1][2], `bindings.o` stops containing DWARF debug information because the
`Default` implementations contained `write_bytes()` calls which are now
ignored in that cost model (note that `CLIPPY=1` does not reproduce it).
This means `gendwarfksyms` complains:
RUSTC L rust/bindings.o
error: gendwarfksyms: process_module: dwarf_get_units failed: no debugging information?
There are several alternatives that would work here: conditionally
skipping in the cases needed (but that is subtle and brittle), forcing
DWARF generation with e.g. a dummy `static` (ugly and we may need to
do it in several crates), skipping the call to the tool in the Kbuild
command when there are no exports (fine) or teaching the tool to do so
itself (simple and clean).
Thus do the last one: don't attempt to process files if we have no symbol
versions to calculate.
[ I used the commit log of my patch linked below since it explained the
root issue and expanded it a bit more to summarize the alternatives.
- Miguel ]
Cc: stable@vger.kernel.org # Needed in 6.17.y.
Reported-by: Haiyue Wang <haiyuewa@163.com>
Closes: https://lore.kernel.org/rust-for-linux/b8c1c73d-bf8b-4bf2-beb1-84ffdcd60547@163.com/
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/CANiq72nKC5r24VHAp9oUPR1HVPqT+=0ab9N0w6GqTF-kJOeiSw@mail.gmail.com/
Link: ab91a63d40 [1]
Link: https://github.com/rust-lang/rust/pull/145910 [2]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251110131913.1789896-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support for parsing PC source info in stacktraces (e.g. '(P)') was added
in commit 2bff77c665 ("scripts/decode_stacktrace.sh: fix decoding of
lines with an additional info"). However, this logic was placed after the
build ID processing. This incorrect order fails to parse lines containing
both elements, e.g.:
drm_gem_mmap_obj+0x114/0x200 [drm 03d0564e0529947d67bb2008c3548be77279fd27] (P)
This patch fixes the problem by extracting the PC source info first and
then processing the module build ID. With this change, the line above is
now properly parsed as such:
drm_gem_mmap_obj (./include/linux/mmap_lock.h:212 ./include/linux/mm.h:811 drivers/gpu/drm/drm_gem.c:1177) drm (P)
While here, also add a brief explanation the build ID section.
Link: https://lkml.kernel.org/r/20251030010347.2731925-1-cmllamas@google.com
Fixes: 2bff77c665 ("scripts/decode_stacktrace.sh: fix decoding of lines with an additional info")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Puranjay Mohan <puranjay@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
After commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"), running modules_install with certain
versions of kmod (such as 29.1 in Ubuntu Jammy) in certain
configurations may fail with:
depmod: ERROR: kmod_builtin_iter_next: unexpected string without modname prefix
The additional padding bytes to ensure .modinfo is aligned within
vmlinux.unstripped are unexpected by kmod, as this section has always
just been null-terminated strings.
Strip the trailing padding bytes from modules.builtin.modinfo after it
has been extracted from vmlinux.unstripped to restore the format that
kmod expects while keeping .modinfo aligned within vmlinux.unstripped to
avoid regressing the Authenticode calculation fix for EDK2.
Cc: stable@vger.kernel.org
Fixes: d50f210913 ("kbuild: align modinfo section for Secureboot Authenticode EDK2 compat")
Reported-by: Omar Sandoval <osandov@fb.com>
Reported-by: Samir M <samir@linux.ibm.com>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/7fef7507-ad64-4e51-9bb8-c9fb6532e51e@linux.ibm.com/
Tested-by: Omar Sandoval <osandov@fb.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251105-kbuild-fix-builtin-modinfo-for-kmod-v1-1-b419d8ad4606@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Commit b5e3956535 ("kbuild: install-extmod-build: Fix build when
specifying KBUILD_OUTPUT") tried to address the "build" variable
expecting a relative path by using `realpath --relative-base=.`, but
this only works when the given directory is below the current directory.
`realpath --relative-to=.` will return a relative path in all cases.
Fixes: b5e3956535 ("kbuild: install-extmod-build: Fix build when specifying KBUILD_OUTPUT")
Signed-off-by: James Le Cuirot <chewi@gentoo.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251016091417.9985-1-chewi@gentoo.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
After commit 5ab23c7923 ("modpost: Create modalias for builtin
modules"), relocatable RISC-V kernels with CONFIG_KASAN=y start failing
when attempting to strip the module device table symbols:
riscv64-linux-objcopy: not stripping symbol `__mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table' because it is named in a relocation
make[4]: *** [scripts/Makefile.vmlinux:97: vmlinux] Error 1
The relocation appears to come from .LASANLOC5 in .data.rel.local:
$ llvm-objdump --disassemble-symbols=.LASANLOC5 --disassemble-all -r drivers/irqchip/irq-starfive-jh8100-intc.o
drivers/irqchip/irq-starfive-jh8100-intc.o: file format elf64-littleriscv
Disassembly of section .data.rel.local:
0000000000000180 <.LASANLOC5>:
...
1d0: 0000 unimp
00000000000001d0: R_RISCV_64 __mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table
...
This section appears to come from GCC for including additional
information about global variables that may be protected by KASAN.
There appears to be no way to opt out of the generation of these symbols
through either a flag or attribute. Attempting to remove '.LASANLOC*'
with '--strip-symbol' results in the same error as above because these
symbols may refer to (thus have relocation between) each other.
Avoid this build breakage by switching to '--strip-unneeded-symbol' for
removing __mod_device_table__ symbols, as it will only remove the symbol
when there is no relocation pointing to it. While this may result in a
little more bloat in the symbol table in certain configurations, it is
not as bad as outright build failures.
Fixes: 5ab23c7923 ("modpost: Create modalias for builtin modules")
Reported-by: Charles Mirabile <cmirabil@redhat.com>
Closes: https://lore.kernel.org/20251007011637.2512413-1-cmirabil@redhat.com/
Suggested-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Commit 27758d8c25 ("kbuild: enable -Werror for hostprogs")
unconditionally enabled -Werror for the compiler, assembler, and linker
when building the host programs, as the build footprint of the host
programs is small (thus risk of build failures from warnings are low)
and that stage of the build may not have Kconfig values (thus
CONFIG_WERROR could not be used as a precondition).
While turning warnings into errors unconditionally happens in a few
places within the kernel, it can be disruptive to people who may be
building with newer compilers, such as while doing a bisect. While it is
possible to avoid this behavior by passing HOSTCFLAGS=-w or
HOSTCFLAGS=-Wno-error, it may not be the most intuitive for regular
users not intimately familiar with Kbuild.
Avoid being disruptive to the entire build by depending on the explicit
opt-in of CONFIG_WERROR or W=e to enable -Werror and the like while
building the host programs. While this means there is a small portion of
the build that does not have -Werror enabled (namely scripts/kconfig/*
and scripts/basic/fixdep), it is better than not having it altogether.
Fixes: 27758d8c25 ("kbuild: enable -Werror for hostprogs")
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/20251005011100.1035272-1-safinaskar@gmail.com/
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org> # Rust
Link: https://patch.msgid.link/20251006-kbuild-hostprogs-werror-fix-v1-1-23cf1ffced5c@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The "transitional" symbol keyword, while working with the "olddefconfig"
target, was prompting during "oldconfig". This occurred because these
symbols were not being marked as user-defined when they received values
from transitional symbols that had user values. The "olddefconfig" target
explicitly doesn't prompt for anything, so this deficiency wasn't noticed.
The issue manifested when a symbol's value came from a transitional
symbol's user value but the receiving symbol wasn't marked with
SYMBOL_DEF_USER. Thus the "oldconfig" logic would then prompt for these
symbols unnecessarily.
Check after value calculation whether a symbol without a user value
gets its value from a single transitional symbol that does have a user
value. In such cases, mark the receiving symbol as user-defined to
prevent prompting.
Update regression tests to verify that symbols with transitional defaults
are not prompted in "oldconfig", except when conditional defaults evaluate
to 'no' and should legitimately be prompted.
Build tested with "make testconfig".
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wgZjUk4Cy2XgNkTrQoO8XCmNUHrTe5D519Fij1POK+3qw@mail.gmail.com/
Fixes: f9afce4f32 ("kconfig: Add transitional symbol attribute for migration support")
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20250930154514.it.623-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The commit 1b8abbb121 ("bpf...d_path(): constify path argument")
constified the first parameter of the bpf_d_path(), but failed to
update it in all places. Finish constification.
Otherwise the selftest fail to build:
.../selftests/bpf/bpf_experimental.h:222:12: error: conflicting types for 'bpf_path_d_path'
222 | extern int bpf_path_d_path(const struct path *path, char *buf, size_t buf__sz) __ksym;
| ^
.../selftests/bpf/tools/include/vmlinux.h:153922:12: note: previous declaration is here
153922 | extern int bpf_path_d_path(struct path *path, char *buf, size_t buf__sz) __weak __ksym;
Fixes: 1b8abbb121 ("bpf...d_path(): constify path argument")
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment:🆕:<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment:🆕:<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment:🆕:<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment:🆕:<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
Segmentation fault ./scripts/mod/modpost -o vmlinux.symvers vmlinux.o
stops the kernel build. It comes when write_vmlinux_export_c_file()
tries to buf_printf alias->builtin_modname. malloc'ed memory is not
necessarily zeroed. NULL new->builtin_modname before adding to aliases.
Fixes: 5ab23c7923 ("modpost: Create modalias for builtin modules")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/4590a243-0a7e-b7e6-e2d3-cd1b41a12237@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Add a new Coccinelle script to identify places where PTR_ERR() is used
in print functions and suggest using the %pe format specifier instead.
For printing error pointers (i.e., a pointer for which IS_ERR() is true)
%pe will print a symbolic error name (e.g,. -EINVAL), opposed to the raw
errno (e.g,. -22) produced by PTR_ERR().
It also makes the code cleaner by saving a redundant call to PTR_ERR().
The script supports context, report, and org modes.
Example transformation:
printk("Error: %ld\n", PTR_ERR(ptr)); // Before
printk("Error: %pe\n", ptr); // After
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1758192227-701925-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During kernel option migrations (e.g. CONFIG_CFI_CLANG to CONFIG_CFI),
existing .config files need to maintain backward compatibility while
preventing deprecated options from appearing in newly generated
configurations. This is challenging with existing Kconfig mechanisms
because:
1. Simply removing old options breaks existing .config files.
2. Manually listing an option as "deprecated" leaves it needlessly
visible and still writes them to new .config files.
3. Using any method to remove visibility (.e.g no 'prompt', 'if n',
etc) prevents the option from being processed at all.
Add a "transitional" attribute that creates symbols which are:
- Processed during configuration (can influence other symbols' defaults)
- Hidden from user menus (no prompts appear)
- Omitted from newly written .config files (gets migrated)
- Restricted to only having help sections (no defaults, selects, etc)
making it truly just a "prior value pass-through" option.
The transitional syntax requires a type argument and prevents type
redefinition:
config NEW_OPTION
bool "New option"
default OLD_OPTION
config OLD_OPTION
bool
transitional
help
Transitional config for OLD_OPTION migration.
This allows seamless migration: olddefconfig processes existing
CONFIG_OLD_OPTION=y settings to enable CONFIG_NEW_OPTION=y, while
CONFIG_OLD_OPTION is omitted from newly generated .config files.
Added positive and negative testing via "testconfig" make target.
Co-developed-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The kconfig test harness ("make testconfig") was generating BrokenPipeError
warnings when running interactive tests like oldaskconfig and oldconfig:
/usr/lib/python3/dist-packages/_pytest/unraisableexception.py:85: PytestUnraisableExceptionWarning: Exception ignored in: <_io.BufferedWriter name=12>
Traceback (most recent call last):
File "/srv/code/scripts/kconfig/tests/conftest.py", line 127, in oldaskconfig
return self._run_conf('--oldaskconfig', dot_config=dot_config,
~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
interactive=True, in_keys=in_keys)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
BrokenPipeError: [Errno 32] Broken pipe
The issue occurred when the test framework attempted to write to stdin
after the conf subprocess had already exited.
Wrap stdin write operations in try/except to catch BrokenPipeError and
stop sending more input. Add explicit flush() after writes so we can see
delivery errors immediately. Ignore BrokenPipeError when closing stdin.
Explicitly call wait() to validate subprocess termination.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Alexey Gladkov says:
The modules.builtin.modinfo file is used by userspace (kmod to be specific) to
get information about builtin modules. Among other information about the module,
information about module aliases is stored. This is very important to determine
that a particular modalias will be handled by a module that is inside the
kernel.
There are several mechanisms for creating modalias for modules:
The first is to explicitly specify the MODULE_ALIAS of the macro. In this case,
the aliases go into the '.modinfo' section of the module if it is compiled
separately or into vmlinux.o if it is builtin into the kernel.
The second is the use of MODULE_DEVICE_TABLE followed by the use of the
modpost utility. In this case, vmlinux.o no longer has this information and
does not get it into modules.builtin.modinfo.
For example:
$ modinfo pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30
modinfo: ERROR: Module pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30 not found.
$ modinfo xhci_pci
name: xhci_pci
filename: (builtin)
license: GPL
file: drivers/usb/host/xhci-pci
description: xHCI PCI Host Controller Driver
The builtin module is missing alias "pci:v*d*sv*sd*bc0Csc03i30*" which will be
generated by modpost if the module is built separately.
To fix this it is necessary to add the generated by modpost modalias to
modules.builtin.modinfo. Fortunately modpost already generates .vmlinux.export.c
for exported symbols. It is possible to add `.modinfo` for builtin modules and
modify the build system so that `.modinfo` section is extracted from the
intermediate vmlinux after modpost is executed.
Link: https://patch.msgid.link/cover.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
For some modules, modalias is generated using the modpost utility and
the section is added to the module file.
When a module is added inside vmlinux, modpost does not generate
modalias for such modules and the information is lost.
As a result kmod (which uses modules.builtin.modinfo in userspace)
cannot determine that modalias is handled by a builtin kernel module.
$ cat /sys/devices/pci0000:00/0000:00:14.0/modalias
pci:v00008086d0000A36Dsv00001043sd00008694bc0Csc03i30
$ modinfo xhci_pci
name: xhci_pci
filename: (builtin)
license: GPL
file: drivers/usb/host/xhci-pci
description: xHCI PCI Host Controller Driver
Missing modalias "pci:v*d*sv*sd*bc0Csc03i30*" which will be generated by
modpost if the module is built separately.
To fix this it is necessary to generate the same modalias for vmlinux as
for the individual modules. Fortunately '.vmlinux.export.o' is already
generated from which '.modinfo' can be extracted in the same way as for
vmlinux.o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/28d4da3b0e3fc8474142746bcf469e03752c3208.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
With lines having a code to decode, the alignment was not preserved for
the first line.
With this sample ...
[ 52.238089][ T55] RIP: 0010:__ip_queue_xmit+0x127c/0x1820
[ 52.238401][ T55] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 (...)
... the script was producing the following output:
[ 52.238089][ T55] RIP: 0010:__ip_queue_xmit (...)
[ 52.238401][ T55] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 (...)
That's because scripts/decodecode doesn't preserve the alignment. No need
to modify it, it is enough to give only the "Code: (...)" part to this
script, and print the prefix without modifications.
With the same sample, we now have:
[ 52.238089][ T55] RIP: 0010:__ip_queue_xmit (...)
[ 52.238401][ T55] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 (...)
Link: https://lkml.kernel.org/r/20250908-decode_strace_indent-v1-3-28e5e4758080@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Carlos Llamas <cmllamas@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Elliot Berman <quic_eberman@quicinc.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With lines having a symbol to decode, the script was only trying to
preserve the alignment for the timestamps, but not the rest, nor when the
caller was set (CONFIG_PRINTK_CALLER=y).
With this sample ...
[ 52.080924] Call Trace:
[ 52.080926] <TASK>
[ 52.080931] dump_stack_lvl+0x6f/0xb0
... the script was producing the following output:
[ 52.080924] Call Trace:
[ 52.080926] <TASK>
[ 52.080931] dump_stack_lvl (arch/x86/include/asm/irqflags.h:19)
(dump_stack_lvl is no longer aligned with <TASK>: one missing space)
With this other sample ...
[ 52.080924][ T48] Call Trace:
[ 52.080926][ T48] <TASK>
[ 52.080931][ T48] dump_stack_lvl+0x6f/0xb0
... the script was producing the following output:
[ 52.080924][ T48] Call Trace:
[ 52.080926][ T48] <TASK>
[ 52.080931][ T48] dump_stack_lvl (arch/x86/include/asm/irqflags.h:19)
(the misalignment is clearer here)
That's because the script had a workaround for CONFIG_PRINTK_TIME=y only,
see the previous comment called "Format timestamps with tabs".
To always preserve spaces, they need to be recorded along the words. That
is what is now done with the new 'spaces' array.
Some notes:
- 'extglob' is needed only for this operation, and that's why it is set
in a dedicated subshell.
- 'read' is used with '-r' not to treat a <backslash> character in any
special way, e.g. when followed by a space.
- When a word is removed from the 'words' array, the corresponding space
needs to be removed from the 'spaces' array as well.
With the last sample, we now have:
[ 52.080924][ T48] Call Trace:
[ 52.080926][ T48] <TASK>
[ 52.080931][ T48] dump_stack_lvl (arch/x86/include/asm/irqflags.h:19)
(the alignment is preserved)
Link: https://lkml.kernel.org/r/20250908-decode_strace_indent-v1-2-28e5e4758080@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Carlos Llamas <cmllamas@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Elliot Berman <quic_eberman@quicinc.com>
Cc: Luca Ceresoli <luca.ceresoli@bootlin.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit bd7c231212 ("pinctrl: meson: Fix typo in device table macro")
is needed in kbuild-next to avoid a build error with a future change.
While at it, address the conflict between commit 41f9049cff ("riscv:
Only allow LTO with CMODEL_MEDANY") and commit 6578a1ff6a ("riscv:
Remove version check for LTO_CLANG selects"), as reported by Stephen
Rothwell [1].
Link: https://lore.kernel.org/20250908134913.68778b7b@canb.auug.org.au/ [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The regex in this block of code makes no sense, and a quick test shows that
it never matches anything; simply delete the code.
No output changes.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
